Work piece: HDD shaft
1) Machining range | |
---|---|
O.D. | 2.5 - 5 mm |
Length | 4 - 10 mm |
2) Work piece support system | |
Two roll O.D centerless support system | |
3) Machining method | |
Infeed type, Plunge traverse work | |
4) Drive roller unit | |
Roller revolution |
Max. 1,000 rpm Automatic multi-step change-over |
Roller O.D. | 55 mm |
Motor | AC servomotor |
5) Stone lapping unit | |
Oscillation frequency |
Max. 4,000 fpm Automatic multi-step change-over |
Amplitude | Amplitude is changeable by oscillating cam |
Motor | Inverter control |
6) Slide table unit part | |
Movement amount | 70 mm |
Feeding speed | 0 - 100 mm/sec. |
Minimum feeding amount | 0.001 mm |
Motor | AC servomotor |
7) Stone head part | |
Stone pressurization |
Pneumatic drive, slant type, auto-slide system Automatic multi-step change-over |
Stone pressure stroke | 45 mm |
Stone engage stroke | 2.5 mm |
8) Pressure unit part | |
Movement amount | Pneumatic drive 10 mm |
9) Backing head part | |
Fixed type | |
10) Delivery unit inside M/C system | |
Motor | AC servomotor |
11) Machine size | |
(W)1,590×(D)1,205×(H)1,660 mm | |
12) Machine weight | |
1,500 Kg |
Note : Specifications are subject to change without notice.