Machine model | SR-500ZS-A | SR-500ZS-B | SR-500ZS-C | |
---|---|---|---|---|
Machine cycle (fully automatic) | 4pcs/cycle | 4pcs/cycle | 2pcs/cycle | |
Work size | O.D. D | 10 - 30 mm | 20 - 50 mm | 35 - 65 mm |
Length L | 10 - 35 mm | 25 - 45 mm | 45 - 63.5 mm | |
Curvature R | R20 - R150 mm | R80 - R200 mm | R130 - R230 mm |
1) Work piece | |
---|---|
Self-aligning roller | |
2) Machining range | |
O.D. | 10 ≦ D ≦ 65 mm |
Length | 10 ≦ L ≦ 63.5 mm |
Curvature |
20 ≦ R ≦ 230 mm Machining range is classified according to 3 types of A, B, C (Please refer to Tooling Classification Table) |
3) Work piece support system | |
Infeed type, roller centerless support system | |
4) Support roller unit | |
Roller diameter | 100 mm |
Roller revolution |
80 - 400 rpm Automatic multi-step change-over DD (direct drive) system run by (2) AC servo motors |
Clamp unit | Clamp cylinder system (Air-hydro, automatic clamping at 8 places) |
Roller drive motor | AC Servomotor |
5) S.F. unit | |
Oscillation unit | |
Oscillation frequency |
600 fpm (Max.) Automatic multi-step change-over |
Oscillation angle | Max.±3° (stepless) Oscillation angle manually adjusted |
Oscillation motor | Inverter control |
Lifting unit | |
Stroke | 360 mm (Max.) |
Lifting drive motor | AC servomotor |
6) Stone head | |
Stone head Ass'y |
Automatic slide type, Automatic multi-step change-over |
Stone pressurization system | Pneumatic drive/electropneumatic regulator control |
Stone length | 55 mm |
Number of stone head | 4 heads (Type C : 2 heads) |
7) Work carrier unit | |
Drive system | Lift & Carry type (Lifting & Linear unit) |
Lifting unit motor | AC servomotor |
Linear unit motor | AC servomotor |
8) Machine size | |
(W)1,530×(D)1,754×(H)2,100 mm | |
9) Machine weight | |
3,200 Kg |
Note : Specifications are subject to change without notice.