Work piece: Zirconia ferrule
1) Machining range | |
---|---|
O.D. | 1 - 20 mm |
Length | - 30 mm |
2) Work piece support system | |
Two rolls One shoe, centerless support system | |
3) Machining method | |
Infeed type, Plunge cut | |
4) Roller drive unit | |
Roller O.D. | 75 or 80 |
Roller Revolution |
Max. 1,000 rpm Automatic multi-step change-over |
Drive Motor | AC servomotor |
5) Stone head unit part | |
Stone pressurization unit | |
Stone spindle revolution |
Max. 11,250 rpm Rough/Finish fully automatic multi-step change-over |
Stone O.D. | - 30 mm |
Pressure stroke |
35 mm Electropneumatic regulator control system Rough/Finish automatic multi-step change-over |
Stone spindle drive motor | AC Servomotor |
Swivel angle | 0° - 20° (Clockwise) |
Approach slide unit part | |
Approach stroke | 35 mm |
Feeding speed | 0 - 100 mm/sec. |
Approach drive motor | AC servomotor |
6) Machine size | |
(W)800×(D)1,680×(H)1,400 mm | |
7) Machine weight | |
1,500 Kg |
Note : Specifications are subject to change without notice.